| Customization: | Available |
|---|---|
| Certification: | GS, RoHS, CE, ISO9001 |
| Color: | Transparent |
|
Still deciding? Get samples of US$ 1/Roll
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Products | 4910 | |
| Adhesive Family: | Tape | |
| Adhesive Carrier: | Acrylic Closed Cell | |
| Thickness: Nominal Tolerance in. (mm) |
0.040 (1.0) ± 10% |
|
| Color: | Clear | |
| Release Liner: in. (mm) |
0.0052 (0.125) Red Poly-ethylene |
|
| Approximate Density: (Foam Only) lb./ft.³ (kg/m³) |
60 (960) |
|
| Roll Length: | Standard yds. (m) |
36 (32.9) |
| Maximum Standard Units a. 1/4" up to 1/2" wide yd. b. 1/2" and wider yd. |
72 144 |
|
| Metric Equivalents a. 6.4 mm up to 12.7 mm wide (m) b. 12.7 mm and wider (m) |
(65.8) (197.5) |
|
| Roll Width: | Minimum in. in. (mm) |
1/4 0.25 (6.4) |
| Maximum in. (mm) |
46 (1170) |
|
| Slitting Tolerance: in. in. (mm) |
± 1/32 ± 0.031 (± 0.8) |
|
| Peel Adhesion: To Stainless Steel Room Temperature 90° Peel Jaw Speed 12 in./min. (305 mm/min.) ASTM D-3330 |
lb./in. (N/100 mm) |
15 (260) |
| Normal Tensile: (T-block) To Aluminum Room Temperature 1 in.²(6.45 cm²) Jaw Speed 2 in./min. (50 mm/min.) ASTM D-897 |
lb./in.² (kPa) |
100 (690) |
| Note: Tensile is highly dependent on good surface contact,which can be difficult on rigid surfaces with thin tapes. | ||
| Static Shear: Static Shear measured at various temperatures and gram loadings on stainless steel. 1/2 sq. in. (3.22 cm²) overlap. Will hold listed weight for 10,000 min. ASTM D-3654 |
72°F (22°C) 150°F (66°C) 200°F (93°C) 250°F (121°C) 300°F (149°C) 350°F (177°C) |
1000 500 500 |
| Dynamic Shear: To Stainless Steel 1 sq. in. (6.45 cm² ) overlap. Room Temperature Jaw Speed 1/2 in./min. (12.7 mm/min.) ASTM D-1002 |
lb./in.² (kPa) |
70 (480) |
| Note: Dynamic shear is highly dependent on good surface contact which can be difficult on rigid surfaces with thin tapes. |
||
| Temperature Tolerance: Short-Term No change in room temperature dynamic shear properties following 4 hour conditioning at indicated temperature with 100g static load |
°F °C |
300 (149) |
| Temperature Tolerance: Long-Term Maximum temperature where tape supports 250g in static shear for 10,000 minutes. |
°F °C |
200 (93) |
| Solvent Resistance: Splash testing cycle - 20 seconds submersion, 20 sec. airdry, 3 cycles |
No apparent degradation of any Tapes when exposed to splash testing of many common solvents, and fuels including gasoline, JP-4 jet fuel, mineral spirits, motor oil, ammonia cleaner, acetone, methyl ethyl ketone (MEK). | |
| Moisture Resistance: 10 years submersion in water, 5% salt water |
Integrity of tape bond to aluminum for tapes 4945 and 4950 (also expected for other Tapes) has remained excellent after testing of 10 years submersion in water and salt water. Note: Continuous submersion in liquids is not recommended and this information is provided soley to suggest that occasional contact with liquids should not be detrimental to tape performance in ordinary use. | |
| U.V. Resistance: | This family of tapes has shown excellent U.V. resistance in outdoor weathering tests and weather-o-meter tests. | |
| Shelf Life: | 24 months from date of manufacture when stored in original cartons at 70°F (21°C) and 50% relative humidity. | |
){kind=link}